Tubing Tools
MSC Mitutoyo Stylus Adapter, 8 mm Shank, 54 mm, 1 ea.
This stylus adapter is designed to facilitate the mounting of styli for coordinate measuring machines. It features an M3 thread, allowing for secure integration with compatible probes.
- Compatible with M3 thread probes
- Designed for use with the LH series
- Features an 8 mm shank diameter
- Includes a 54 mm total length
Med Vet International Cortical Screws, J0416B, 2.0mm x 8mm, 6 Count
Available in 6mm-24mm lengths, the spherical head of the screw produces compression when used in conjunction with 2mm compression plate.
MSC Mitutoyo Anvil, NO.6, 8.5 mm
This anvil is a precision component designed for various measurement applications. It is specifically identified as NO.6 and features an 8.5 mm measuring surface.
- Designated as NO.6
- Features an 8.5 mm measuring surface
- Provides stable support for precise measurements
- Durable for long-lasting performance
Grainger 45 Wye 316 SS 4 x 3 x 4 in Pipe Size
The Grainger Approved 45° Wye is a PVC pipe fitting used to connect pipes at a 45 degree angle. It has a maximum temperature rating of 140°F and maximum pressure rating of 100 PSI. The fitting has solvent weld sockets and is made of PVC Schedule 40. It is compliant with ASTM D2466 standards. The fitting has a nominal pipe size of 1-1/2" and is gray in color. The 45° wye allows for a smooth 45 degree change of direction in a PVC piping system.
Bellco Glass, Inc. Reducing Couplers, 3/16x1/16" Single-Barbed
Clear poly-carbonate singled barbed tube fitting. Tubing use with PVC polyurethane with a hardness of shore A 45-90. These poly-carbonate single barbed fitting are transparent so you can see that is flowing through your line. Single barbed fitting minimize leaks by having a smoother sealing surface than multi barbed fittings. Poly-carbonate has high impact strength use with air, water, and food beverage material meets FDA CFR21 1771580. Can be sterilized with steam autoclaving
Mac-Mod MarvelXACT PEEKsil 100µmx600 mm supplied by MAC-MOD
MAC-MOD helps you ensure a perfect connection every time with the MarvelXACT™ Fitting System - the options available are:No risk of under- or over-tightening with torque limiting mechanismFace sealing ensures Zero Dead VolumeMinimize carryover, peak broadening, and peak tailingFinger-tight to 19,000 psi100+ connects and disconnectsNo training or instructions needed to make a perfect connection everytimeBioinert BioVersal™ PEEK Lined Stainless Steel and PEEKsil Configurations Available
Med Vet International Cortical screws, J0419A, 2.7mm x 6mm, 6 Count
2.7mm Cortical Screw. Use with 2.7mm compression and 2.7mm reconstruction plates to obtain compression at a fracture site.
Mac-Mod MarvelXact PEEKsil 75 µm x 350 mm supplied by MAC-MOD
MAC-MOD helps you ensure a perfect connection every time with the MarvelXACT™ Fitting System - the options available are:No risk of under- or over-tightening with torque limiting mechanismFace sealing ensures Zero Dead VolumeMinimize carryover, peak broadening, and peak tailingFinger-tight to 19,000 psi100+ connects and disconnectsNo training or instructions needed to make a perfect connection everytimeBioinert BioVersal™ PEEK Lined Stainless Steel and PEEKsil Configurations Available
Med Vet International 2.4mm x 16mm Stainless Steel Cortical Self-Tapping Screws, J1073AA, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Grainger Hose Adapter 1-1/4 NPTF 1/4 NPTF
The Grainger 1-1/4" NPT Female x 1/4" NPT Female Hose Adapter is made from brass for durability. It has a maximum pressure rating of 3000 psi and temperature rating of 250°F. This adapter allows you to connect a 1-1/4" NPT threaded pipe to a 1/4" NPT threaded hose. It can be used in hydraulic, lubrication, refrigeration, instrumentation, industrial, or mobile equipment applications. The dimensions are 2-1/2" length x 1-5/16" width. It weighs 0.19 lbs. This adapter provides a secure threaded connection between mismatched thread sizes.
Mac-Mod MarvelXACT SS 100µm x 500mm supplied by MAC-MOD
MAC-MOD helps you ensure a perfect connection every time with the MarvelXACT™ Fitting System - the options available are:No risk of under- or over-tightening with torque limiting mechanismFace sealing ensures Zero Dead VolumeMinimize carryover, peak broadening, and peak tailingFinger-tight to 19,000 psi100+ connects and disconnectsNo training or instructions needed to make a perfect connection everytimeBioinert BioVersal™ PEEK Lined Stainless Steel and PEEKsil Configurations Available